USB-KV Suitable Keyence KV all Series Programming Cable Communication Data line Download Cable

-
Optical Isolation Vesion Suitable Keyence KV Series PLC Programming Cable USB-KV + 
  

Features and Specifications: 

Support USB-KV + isolated operating system: WIN2000 / WINXP / WIN7 / WIN8. 
Support USB-KV + Isolated programming software version: KV STUDIO V4.0 or above. Fully compatible with 1.1 or USB 2.0. USB bus-powered, the current consumption of about 70mA. 
Baud Rate: 300bps ~ 1Mbps standard automatic baud rate adaptation.
Support UART data format: data bits: 7, 8, stop bits: 1, 2 Parity: odd / even / no parity. 
Working temperature: -20 to + 75 degrees Celsius. 
Cable length: 3 m.

Isolation Type usb-kv drive

FTDI Type usb-kv drive

Economic Type usb-kv drive



Wiring Diagram of Keyence KV Series PLC Programming Line

Hot Post

amsamotion driver download

-
The USB product models that do not need to manually install the driver are: (Note: Please carefully check the model on the white label of the product package (Model) USB-LOGO/CA3-USBCB-01/0CB20/3DB30/USB-Mini/USB-Micro/USB-square port After the above products are plugged into the computer’s USB port, a yellow question mark or exclamation mark will appear in the “other devices” in the computer device manager https://www.amsamotion.store/2019/12/amsamotion-plc-programmable-cable-driver.html
Read more

6es7 901-3db30-0xa0 driver

-
  6ES7901-3DB30-0XA0 Siemens s7-200plc multi-master ppi programming cable with isolated usb interface, directly use the usb interface in step7microwin software, no need to install drivers, support ppi, multi-master ppi, advanced ppi protocol, support 187.5 kbps high-speed communication, with communication indicator. 6ES7901-3DB30-0XA0 is an intelligent multi-master PPI programming cable (PPI Multi-Master Cable) with USB interface, which realizes level conversion from USB to RS485 and various PPI protocol conversion. At present, many cheap USB/PPI on the market communicate by converting USB into virtual serial port (COM port), commonly known as “pseudo USB interface”. This kind of cable is only a level conversion from USB to RS485 and can only support ordinary PPI protocol. . And USB/PPIM+ is a real USB interface cable, no need to install driver, directly use the USB option in STEP7 Micre/WIN software, support PPI, advanced PPI (Advanced PPI), multi-master PPI (Multiple Master Network)
Read more