amx-fx3u-26mt-e manual

-
AMX-FX3U Compatible Mitsubishi MELSEC PLC

1. The programming port is the standard RS422 S terminal. In addition, the programming port can also communicate with the touch screen that supports the FX3U PLC protocol.
2. Comes with RS485 communication port, supports MODBUS RTU communication protocol, supports FX3U PLC protocol touch screen communication
3. Comes with 1 RJ45 network port, supports MODBUS TCP communication protocol, and supports Mitsubishi GX Works2 or above programming
The software uses the network port to communicate with the PLC
High-speed counter function
1. Support 6 channels (X0~X5) single-phase high-speed pulse counting, 2 channels AB phase counting, of which 4 channels (X0~X3) 100K single-phase
Counting, 2 channels (X4~X5) 40K pulse counting

AMX-FX3U-Relay_Ver1.3

AMX-FX3U-El_Ver1.3)

AMX-FX3U-E Series manual_Ver1.2

AMX-FX3U_V1.2

3U-PLC-and-MODBUS-IO8R-communication-case.gxw

485-port-as-MODBUS-RTU-slave-station-version-V1.3.gxw

Hot Post

amsamotion driver download

-
The USB product models that do not need to manually install the driver are: (Note: Please carefully check the model on the white label of the product package (Model) USB-LOGO/CA3-USBCB-01/0CB20/3DB30/USB-Mini/USB-Micro/USB-square port After the above products are plugged into the computer’s USB port, a yellow question mark or exclamation mark will appear in the “other devices” in the computer device manager https://www.amsamotion.store/2019/12/amsamotion-plc-programmable-cable-driver.html
Read more

6es7 901-3db30-0xa0 driver

-
  6ES7901-3DB30-0XA0 Siemens s7-200plc multi-master ppi programming cable with isolated usb interface, directly use the usb interface in step7microwin software, no need to install drivers, support ppi, multi-master ppi, advanced ppi protocol, support 187.5 kbps high-speed communication, with communication indicator. 6ES7901-3DB30-0XA0 is an intelligent multi-master PPI programming cable (PPI Multi-Master Cable) with USB interface, which realizes level conversion from USB to RS485 and various PPI protocol conversion. At present, many cheap USB/PPI on the market communicate by converting USB into virtual serial port (COM port), commonly known as “pseudo USB interface”. This kind of cable is only a level conversion from USB to RS485 and can only support ordinary PPI protocol. . And USB/PPIM+ is a real USB interface cable, no need to install driver, directly use the USB option in STEP7 Micre/WIN software, support PPI, advanced PPI (Advanced PPI), multi-master PPI (Multiple Master Network)
Read more