tsxpcx3030-c schneider

-
TSXPCX3030-C Plc Programming Cable


This is a suitable replacement cable for Schneider Modicon TSX/neza/twido serires PLC USB programming cable TSXPCX3030.

It simulate USB port as traditional serial port (usually COM3), which enables existing programming software to communicate through simulated traditional port and PLC devices. Can also be connect to Twido PLC's TER or AUX end. Embedded with this cable is the necessary data conversion equipments to communicate between PLC RS485 end to and PC USB end.


The TER port of TSX series PLC has a DPT signal which is used to distinguish the working mode of the port.If the DPT signal is high level,then the TER port is under Uni-Telway Master mode which is a requirement for PLC programming.If DPT signal is low level,then the TER port working mode is determined by the PLC.


Features

Support Windows 7/2000/Windows XP (WinNT4/95/98/Me/DOS NOT SUPPORTED).

Smart LED indicator. Auto identification of optical isolation status.

baud rate: 300 bps ~ 1Mbps automatically adaptive.

USB bus-powered, with current consumption of 50 mA

Each PC Support multiple TSXPCX3030 cables

Reliable performance & reasonable price

Compatible with USB V1.1 and V2.0



TSXPCX3030 DRIVER DOWNLOAD

Hot Post

amsamotion driver download

-
The USB product models that do not need to manually install the driver are: (Note: Please carefully check the model on the white label of the product package (Model) USB-LOGO/CA3-USBCB-01/0CB20/3DB30/USB-Mini/USB-Micro/USB-square port After the above products are plugged into the computer’s USB port, a yellow question mark or exclamation mark will appear in the “other devices” in the computer device manager https://www.amsamotion.store/2019/12/amsamotion-plc-programmable-cable-driver.html
Read more

6es7 901-3db30-0xa0 driver

-
  6ES7901-3DB30-0XA0 Siemens s7-200plc multi-master ppi programming cable with isolated usb interface, directly use the usb interface in step7microwin software, no need to install drivers, support ppi, multi-master ppi, advanced ppi protocol, support 187.5 kbps high-speed communication, with communication indicator. 6ES7901-3DB30-0XA0 is an intelligent multi-master PPI programming cable (PPI Multi-Master Cable) with USB interface, which realizes level conversion from USB to RS485 and various PPI protocol conversion. At present, many cheap USB/PPI on the market communicate by converting USB into virtual serial port (COM port), commonly known as “pseudo USB interface”. This kind of cable is only a level conversion from USB to RS485 and can only support ordinary PPI protocol. . And USB/PPIM+ is a real USB interface cable, no need to install driver, directly use the USB option in STEP7 Micre/WIN software, support PPI, advanced PPI (Advanced PPI), multi-master PPI (Multiple Master Network)
Read more