usb-cif02 driver download

-
USB interface Omron series PLC programming cable,with communication indicator,cable connection between CQM1,CPM1,CPM1A,CPM2A,C200HS,C200HX/HG/HE,SRM1 series PLC and the computer. After connected with CS1W-CN114 cable,it can also be
connected with CS/CJ,CQM1H and CPM2C series PLC. 2.5 Meters

● Support USB-CIF02 operating system: Windows2000/XP/Windows7/Win8 (WinNT4/95/98/Me/DOS not included )
● Support USB-CIF02 programming software version: CX-Programmer V1.0 and above
● fully compatible with USB2.0 norms
● USB-bus powered, with current consumption of 50 mA
● Baud rate: 300 bps ~ 1Mbps automatically adapt to the standard baud rate
● Support UART data format: data bits: 7-8; stop bit: 1, 2; check-bit: odd / even / no parity
● Each PC only supports one USB cable programming
● Working temperature: -20 ~ +75 ℃

Amsamotion USB-CIF02 Omorn plc cable Driver Download for windows 7 10 64bit

Hot Post

amsamotion driver download

-
The USB product models that do not need to manually install the driver are: (Note: Please carefully check the model on the white label of the product package (Model) USB-LOGO/CA3-USBCB-01/0CB20/3DB30/USB-Mini/USB-Micro/USB-square port After the above products are plugged into the computer’s USB port, a yellow question mark or exclamation mark will appear in the “other devices” in the computer device manager https://www.amsamotion.store/2019/12/amsamotion-plc-programmable-cable-driver.html
Read more

6es7 901-3db30-0xa0 driver

-
  6ES7901-3DB30-0XA0 Siemens s7-200plc multi-master ppi programming cable with isolated usb interface, directly use the usb interface in step7microwin software, no need to install drivers, support ppi, multi-master ppi, advanced ppi protocol, support 187.5 kbps high-speed communication, with communication indicator. 6ES7901-3DB30-0XA0 is an intelligent multi-master PPI programming cable (PPI Multi-Master Cable) with USB interface, which realizes level conversion from USB to RS485 and various PPI protocol conversion. At present, many cheap USB/PPI on the market communicate by converting USB into virtual serial port (COM port), commonly known as “pseudo USB interface”. This kind of cable is only a level conversion from USB to RS485 and can only support ordinary PPI protocol. . And USB/PPIM+ is a real USB interface cable, no need to install driver, directly use the USB option in STEP7 Micre/WIN software, support PPI, advanced PPI (Advanced PPI), multi-master PPI (Multiple Master Network)
Read more