usbacab230 driver download

-

 USBACAB230 programming cable is suitable for Delta DVP series PLC, and a virtual serial port is formed after usbacab230 driver. To use programming software

• Operating system supporting USBACAB230: Windows XP / 7/10 32 / 64bit
• Supports USBACAB230 programming software version: WPLSoft V2.03 and above
• USB bus power supply, consumption current is about 50mA
• Baud rate: 300bps ~ 1Mbps standard baud rate automatically adapts
• Support UART data format: data bits: 7, 8, stop bits: 1, 2, parity: odd / even / no parity
• Working temperature: -20 ～ +75 ℃
Instructions:

USBACAB230 programming cable requires driver installation(usbacab230 driver download)

After the driver installation is complete, the COM port corresponding to the USBACAB230 programming cable will appear in the device manager of Windows. Simply select the COM port in the programming software or other application software. Other communication parameters use the default settings. Use the same programming cable as the traditional RS232 interface.

dvpcab215 pinout

Hot Post

amsamotion driver download

-
The USB product models that do not need to manually install the driver are: (Note: Please carefully check the model on the white label of the product package (Model) USB-LOGO/CA3-USBCB-01/0CB20/3DB30/USB-Mini/USB-Micro/USB-square port After the above products are plugged into the computer’s USB port, a yellow question mark or exclamation mark will appear in the “other devices” in the computer device manager https://www.amsamotion.store/2019/12/amsamotion-plc-programmable-cable-driver.html
Read more

6es7 901-3db30-0xa0 driver

-
  6ES7901-3DB30-0XA0 Siemens s7-200plc multi-master ppi programming cable with isolated usb interface, directly use the usb interface in step7microwin software, no need to install drivers, support ppi, multi-master ppi, advanced ppi protocol, support 187.5 kbps high-speed communication, with communication indicator. 6ES7901-3DB30-0XA0 is an intelligent multi-master PPI programming cable (PPI Multi-Master Cable) with USB interface, which realizes level conversion from USB to RS485 and various PPI protocol conversion. At present, many cheap USB/PPI on the market communicate by converting USB into virtual serial port (COM port), commonly known as “pseudo USB interface”. This kind of cable is only a level conversion from USB to RS485 and can only support ordinary PPI protocol. . And USB/PPIM+ is a real USB interface cable, no need to install driver, directly use the USB option in STEP7 Micre/WIN software, support PPI, advanced PPI (Advanced PPI), multi-master PPI (Multiple Master Network)
Read more